About Vision Vapros iBox 25W VW MOD 1500mAh
Vision is a reputed brand in the e-cig sector and carries a reputed name. If you are an e-cig user, you would be aware of some of its reputed brands including Vision Spinner and Vivi Nova. We also offer atomizer kits and vision cartomizers. You can make a selection for your e-cigarette. The Vision spinner battery has been improved and now has a new logo and appearance.
The iBox by Vision features VV/VW mode and comes with a really advanced output which is up to 25W, the micro-USB charging is also a bright side to look forward to. You will get to enjoy prolonged periods of vaping along with strong smoking hits. It can fire up even the most advanced and powerful ohm sub-tanks ranging from 0.5-1.8 ohms.
25W Vision Vapros iBox - 1500mAh
Size (length and width): 94.5 * 54mm
Voltage: 3V - 6V
Wattage: 3W - 25W
Built-in battery: 1500mAh
Vision Vapros iBox 25W VW MOD 1500mAh contains
- 1 xVapros iBox MOD
- 1 x Micro USB cable
- 1 x 220V ac adapter
- 1 X User manual
Simple packing. Customary Packing from the factory, the packing is subject to change without notice.
1. Date and time adjustment
2. External output control
3. Resistance protection control
4. Cut-off time control
5. Three controlling mechanisms
6. VV/VW two modes
Turn on/off: when the iBox is off, pressing the round center button for 2 seconds will enable it. After it's turned on, also press the center button for 2 seconds, it will enter the management console, which shows 6 icons. You can chooseeach icon by rotating the center button;To turn it off, choose the first sub-menu and click the enter button once.
VV/VW mode exchange: these two modes can be easily changed by clicking the center button once.
Time management:use the rotating wheel to choose the second icon and click the center button to enter.Then you can reset time through the rotating wheel and click enter button to get to next section.
External output control: use the rotating wheel to choose the third icon and click the center button to enter. Once clicked, it goes back to the main interface with a lighting sign on the main interface. To be deactivated, repeat the same procedure.
Resistance protection control:use the rotating wheel to choose the fourth icon and click the center button to enter. The range of adjustment is between 0.5ohm to 1.8ohm. Once set, with any carto having lower ohm value than the setted value, the device will report "RESISTANCE PROTECTION" on main screen and stop the power button to work.
Cut-off time control:use the rotating wheel to choose the fifth icon and click the center button to enter.The range of adjustment if between 8 - 18 seconds. Once set, at the configured length of power output (as indicated by the running clock when push the sliding button at side), the device will cut off power output for safety purpose.
Exit:use the rotating wheel to choose the sixth icon and click the center button to enter.It exits the management console and goes back to the main interface.
Charging the device: charge can be done by only use the USB cable, or with both the USB cable and the AC adapter.
- There is CE, ROHS symbol on the body.
- 510 thread, compatible with 510 threaded cartomizers.
Please checkGuarantee Policy.
Guarantee period: 6 months for batteries.