About Vaptio P-I TF 50W Starter Kit 2100mAh
Vaptio hasn't been into vaping business for a long time yet became quite popular with its top quality products. One of the advanced vaping technology they developed is 50W Vaptio Ascension S50 ATC and P-I kits. You can expect better temperature control, enhanced volume of vapor, and better vaping experience from Vaptio. In fact, they also offer necessary accessories to revamp coils, tubes and PT1 tank.
Vaptio P-I includes both Vaptio P-I Kit and Vaptio TF Kit. The newest Vaptio TF supports top filling system, leak proof technology, and temperature control. These qualities make it a perfect vaping device.
50W Vaptio P-I TF Starter Kit
Product Instructions
This Vaptio P-I Kit comes with a top filling tank and a 2100mAh MOD battery. With max power 50W, it brings comfortable vaping experience.
Parameters
Atomizer
Capacity: 3.0ml (Standard version) / 2ml (EU version)
Resistance: 0.2ohm
Size: 22 x 65 mm
MOD Battery
Size: 36 x 81 x 22 mm
Capacity: 2100mAh
Resistance: 0.15ohm - 0.25ohm
Charging: Micro USB (5V, 1A)
510 Spring Thread
Vaptio P-I TF 50W Starter Kit 2100mAh contains
- 1 x Atomizer
- 2 x Coils
- 1 x 2100mAh MOD
- 1 x USB cable
- 1 x User Manual
Simple packing. Customary Packing from the factory, the packing is subject to change without notice.
Features
2100mAh Capacity
Built-in Battery
Airflow Control System
OCC Dual Coils design
New Airflow Design
Short Circuit Protection
Low voltage Protection
Over Use Protection (10S)
Variable Watt options (5 Levels for Wattage Adjustment)
Exquisite Design and Elegant Appearance
Operation Guide
Turn on/off device
Press the fire button 5 times within 2s to turn on/off the device.
Lock/Unlock Adjustment Buttons
Press adjustment buttons together for 2s to lock/unlock these buttons. Red indicator light will flash twice.
Short Circuit Protection
When short circuit occurs (resistance is lower than 0.1ohm), the red indicator light will flash 3 times, then show the less power of battery.
Low-voltage Protection
When the battery voltage is below 3.0V, the red indicator light will flash twice. The battery will stop output. Please recharge the battery to reactivate.
Over-vaping Protection
When the fire button is pressed over 10s, the red indicator will flash 5 times and the battery will stop output automatically.
Wattage Indication
When releasing the fire button, the indicator light will be on for 2s to show the present power. From bottom to top:
One light on: 20% of power
Two lights on: 40% of power
Three lights on: 60% of power
Four lights on: 80% of power
Five lights on: 100% of power
- 510 thread.
- There are CE and FC mark on bottom of the MOD.
- Comes without e-juice. You shall purchase it separately.
Guarantee
6 months for MOD/battery only. Please check Guarantee Policy.
