About Sigelei VR2 50W VW MOD
Among the vaping industries working in China, Sigelei is very famous, and it has a great reputation because the company gives a great variety of products. The rates are very affordable by a common man, and the quality is also up to the mark. There are two mods; the most suitable for the vapers are the box mods because these are an amazing bang and buck devices. The other is the mech mod, and it is something that is desirable for vapers.
50W Sigelei VR2 18650 VV/VW MOD
50W Sigelei VR2 18650 VV/VW MOD, is a popular Sigelei advanced MOD supporting reliable vaping power for all!
Dimension: 96 * 43 * 23mm
Colors: Black and Silver
Output Voltage Range: 1.2V - 8.5V
Variable Wattage: 7.0W - 50.0W
Battery Capacity Range: 3.2V - 4.2V
Atomizer Range: 0.2ohm - 3.0ohm
50W Sigelei comes with
- 1 x 50W Sigelei MOD
- 1 x 50W Sigelei Cover
- 1 x user manual
- 1 x warranty card
- 2 x spare screws
Simple packing. Customary packing from the factory, the packing is subject to change without notice.
- Visual Operating Syetem
- Adjustable Variable Wattage
- Low Voltage Protection
- Low Resistance Protection
- Input High Voltage Warning
- Output Short-Circuit Protection
- Reverse Battery Protection
- High Temperature Protection
- USB Direct Charge
- Replaceable Battery
Low Res = Low Atomizer Resistance(<0.2ohm)
Low Bat = Low Battery Voltage(<3.2V)
HHHHHHHH = High Input Voltage(>5V)
Too Hot = Excessively Hot for Internal PCB
Press power button five times consecutively to turn on the device. Standby mode is expected after 'SIGELEI' showed on the screen.
On the standby mode, the atomizer resistance, output wattage and output voltage will be displayed on the screen.
Press "+" and "-" at same time to lock device; screen will display "LOCK". The device will not fire when locked. "LEASE UNLOCK" will be shown on the screen if any button is pressed. To unlock, press "+" and "-" at same time.
Wattage output can be adjusted from 7W - 500W. Press "+" or "-" to adjust in 1.0W increments.
Press power button 5 times consecutively to turn off the device, showing 'SYSTEM OFF'
Either internal USB charging or external battery charging. The indicate light shows red in USB charging condition and turns green when the device is fully charged.
Input parameter via USB charging: 5.0V - 800mA when charging.
Please do not reverse the battery, otherwise charging function will be voided.
- It uses 2 pcs 18650 batteries.
- It doesn't come with 18650 lithium battery, which you shall buy separately.
Pls check guarantee policy.