Innokin CoolFire ACE 40W Slipstream Kit 1300mAh

About Innokin CoolFire ACE 40W Slipstream Kit 1300mAh

Innokin is one of the main factories in the industry and certainly one of the top e-cig companies in China. They are always coming up with great designs and features, like the SVD MOD, VTR and VV MOD, not to mention the Cool Fire 1 and 2, as well as the iTaste model. All of these add up to bring in front rewarding results and benefits you will enjoy. There's also the iClear series cartomizer. You get all you need for the best vaping experience.

CoolFire II 18350 is a great MOD with a 12.5W output. The IV version has either 100W or 40W depending on the model. You also have the CoolFire Pebble that's smaller yet still very easy to use and convenient at around 50W. The interesting thing is that you get a 1300 mAh battery, micro USB fast charging and VV/VW modes without a problem.

Innokin CoolFire ACE Slipstream Kit

Product Instructions

Parameters

CoolFire ACE MOD
Operating Voltage: 3.0Vâ€7.5V
Operating Wattage: 6.0Wâ€40W
Battery: 1300mAh
Standby current: 100uA max
Maximum output Wattage: 40W
Maximum output Current: 14.5A
Maximum output Voltage: 7.5V
Resistance: 0.2Ohm (minimum)
Charging: Micro USB DC 5V/1A

SlipStream Atomizer
Size: 20 x 42mm
Capacity: 2ml
Coil: 0.8ohm Kanthal (20 - 35W)
Thread: 510

Innokin CoolFire ACE 40W Slipstream Kit 1300mAh contains

• 1 x CoolFire ACE MOD
• 1 x Slipstream Tank
• 1 x Slipstream coil
• 1 x Micro USB Cable
• 1 x Accessories
• 1 x User Manual

Simple packing. Customary Packing from the factory, the packing is subject to change without notice.

• It doesn't come with liquids, you shall buy separately.
• You can buy Slipstream Tank and Slipstream coil separately.
• The MOD doesn't have Temperature control function.

Features

40W output power & Built-in 1300mAh battery
Curved button design and Bright OLED display
Ultra compact size and advanced safety protections
SS 510 threading and Spring-loaded connector pin
Vape while charging technology

Operation Guide

Power on/off: press the fire button 3 times to turn on the ACE, repeat it to turn off it.

Safety: 15 seconds cutoff/ Low voltage warning/ Short circuit (atomizer) protection/ Check Atomizer/ Overheat protection/
Over-discharge protection/ Vape while charging technology/

Variable Wattage Mode: Press and hold "+" and the fire button for 2 seconds to enter the mode. Press "+" "-" button to increase or decrease the wattage.

Variable Voltage Mode: Press and hold "-" and the fire button for 2 seconds to enter variable voltage mode. And press "+" "-" button to increase or decrease the wattage.

Guarantee

3 months of CoolFire ACE MOD. Please check Guarantee Policy.

Safety(+Efficiency(+)Tech